Océ VarioPrint 1055, User Manual, Page: 115 / 194

115
Stop a copy job
Stop a copy job
Introduction
You can stop the copy job, for example when you notice that the output of your copy
job is not correct.
Note:
You can also interrupt a copy job. You or someone else can start a new job.
You can resume the suspended job afterwards ( see ‘Interrupt a copy job’ on
page 113 ).
How to stop a copy job
[35]
If you want to Then
Stop the scanning of originals Press the 'Cancel job' key.
Stop the copying after finishing
the current set Press the Stop key once.
Press the Start key to resume.
Stop the copying immediately Press the Stop key twice.
Press the Start key to resume.
Cancel the copy job Press the Stop key three times.
Your job is canceled.