OcÃ© PlotWave 340 User Manual Download Page 352

Page: 352 / 388

Troubleshoot

Event message

The Postscript or PDF file causes an internal
printer error.

•

Try to print it from an application using the
Océ Windows

Printer Driver.

•

If the error persists, contact Océ Service.

'PS/PDF limitation, one or more
pages not correctly printed'

The Postscript or PDF file is complex and the
printer does not have enough memory to process
it.

•

Try to print it from an application using the
Océ Windows

Printer Driver.

•

If the error persists, contact Océ Service.

'PS/PDF resource issue (memo-
ry, disk), one or more pages not
correctly printed'

The Postscript or PDF file is complex or corrupt.

•

Try to print it from an application using the
Océ Windows

Printer Driver.

•

If the error persists, contact Océ Service.

'PS/PDF resource or language
problem, one or more pages not
correctly printed'

The file contains some non printable pages.

•

The file could be corrupt.

•

The graphic commands in the file could be
missing .

•

The shift setting could be set to a value that
causes the image to move completely off the
paper.

'No pages were generated when
processing the document'

This message can appear when the printer is reboot-
ed after a power failure and some documents in
the printer spool are corrupt.

•

Reprint the job from the submission applica-
tion or from the Smart Inbox.

'Job deleted because it is not re-
coverable (data is corrupt or in-
complete)'

This message can appear when the printer is reboot-
ed after a power failure and some documents in
the printer spool cause software problems.

•

Reprint the job from the submission applica-
tion or from the Smart Inbox.

'Job deleted because it causes a
software crash in the printer'

Chapter 8 - Support

352

Event messages

Operating Information: PlotWave (PW) 340, PW350 - Edition 2013-06

Summary of Contents for PlotWave 340





































































































































































































































































































































































































Search results

Summary of Contents for PlotWave 340

Reviews:

Related manuals for PlotWave 340

Brands by name

Popular brands

OcÃ© PlotWave 340, User Manual

Search results

Summary of Contents for PlotWave 340

Reviews:

Related manuals for PlotWave 340

Brands by name

Popular brands