OcÃ© PlotWave 340 User Manual Download Page 258

Page: 258 / 388

Scan CAD color to 'TIFF' format

Introduction

When you want to scan a

CAD colour

to 'TIFF' format, you can select the presets on

the user panel.

Feed the original face up and centered on the original feeding table.

Note:

You do not need to center the original precisely. The exact position of the original is au-
tomatically detected by the scanner.

Tap the 'Scan' tile on the user panel and select your preferred location in the scan Smart
Access.

Note:

When you do not select a location, the file is sent to the public Smart Inbox.

Tap the 'Scan' tile again. A window with a list of presets opens.

Tap the 'File type' preset.

Select'TIFF'.

Tap the 'Image' preset.

Select

CAD colour

Tap the green button.

Chapter 4 - Use the Printing System

258

Scan CAD color to 'TIFF' format

Operating Information: PlotWave (PW) 340, PW350 - Edition 2013-06

Summary of Contents for PlotWave 340





































































































































































































































































































































































































Search results

Summary of Contents for PlotWave 340

Reviews:

OcÃ© PlotWave 340, User Manual, Page: 258 / 388

Search results

Summary of Contents for PlotWave 340

Reviews: