OBO Bettermann
34 | EN
Installing the isCon® system
• Remove the pin screws from the connection element.
Figure 29:
Removing the grub screws
• Using a fork wrench (WAF 19 mm), screw the isCon
®
IN connect con-
nection element onto the isCon
®
conductor, until the copper core can
be seen completely in the two screw holes.
19 mm
25 mm
Figure 30:
Screwing on the connection element
• Tighten both grub screws with approx. 10 Nm.
10 Nm
Figure 31:
Tightening the grub screws
