System instructions OBO isCon
®
EN | 33
Installing the isCon® system
Preparing the isCon
®
conductor
• When using the isCon
®
ProPI 75 LGR conductor:
Using a cable knife, remove the grey cable jacketing to a length of
50 mm (see also “„5.1 Cutting and removing the insulation of the
isCon® conductor“ on page 28).
• Using a stripping stool, e.g. isCon
®
stripper 2, reveal the copper core
along a length of 25 mm.
25 mm
Figure 27:
Cutting the insulation
• Free the front area of the black jacket from impurities and grease (e.g.
OBO Art. No. 5408 060).
isCon EPPA 004
Figure 28:
Using a cleaning cloth
