Safety
2–2
DOC-24000 Rev. C
Safety Features
Objet30
3
‐
D
printers
are
designed
to
comply
with
CE
and
FCC
standards.
They
are
equipped
with
the
following
safety
features:
Figure 2-1: Front and back views of the Objet30 printer
Cover
interlock
switch
The
power
supplied
to
the
UV
lamp
and
the
motion
motors
is
turned
off
when
the
cover
is
opened.
WARNING:
Do
not
defeat
(override)
the
interlock
switch.
Doing
so
could
result
in
serious
personal
injury.
If
the
interlock
switch
does
not
function
correctly,
do
not
use
the
printer,
and
contact
your
service
provider.
Cover
lock
The
cover
is
locked
while
the
printer
is
working.
It
is
released
when
the
printer
reverts
to
pause
or
stop
mode.
WARNING:
Do
not
defeat
(override)
the
safety
lock.
Doing
so
could
result
in
serious
personal
injury.
If
the
safety
lock
does
not
function
correctly,
do
not
use
the
printer,
and
contact
your
service
provider.
UV
screen
The
transparent
section
of
the
cover
blocks
harmful
UV
radiation,
allowing
the
operator
to
view
the
model
as
it
is
being
made.
Circuit
breaker
The
power
to
the
printer
is
turned
off
in
case
of
electrical
overcurrent.
Note: The circuit breaker is only accessible to
service personnel.
Grounded
chassis
The
chassis
of
the
printer
is
grounded,
to
prevent
electrical
shock.
Note: The power outlet must be properly
grounded, in accordance with the local
electric code, to provide this protection.
UV screen
Cover interlock switch
Circuit breaker
If the Objet30 3-D printing system is not used as specified in this guide, the
safety features may not provide adequate protection.
