DOC-24000 Rev. C
7–23
Objet30 User Guide
6. Place
the
mirror
on
the
build
tray.
7. Put
on
the
gloves.
8. Soak
the
cleaning
cloth
with
the
cleaning
fluid.
9. Clean
the
orifice
plates,
with
a
back
‐
and
‐
forth
motion
(see
Use
the
mirror
to
make
sure
that
you
have
removed
all
of
the
residue
material.
Figure 7-28: Cleaning the heads
10. When
you
have
finished
cleaning,
select
the
confirmation
check
box
in
the
wizard
screen
(see
and
click
Next
.
11. Remove
the
cleaning
materials
from
the
printer
and
close
the
cover.
12. Select
the
confirmation
check
boxes
in
the
wizard
screen
and
click
Next
.
The
head
‐
purge
cycle
begins.
When
this
is
complete,
the
final
wizard
screen
appears.
Figure 7-29: Head cleaning wizard—final screen
13. Click
Done
to
close
the
wizard.
WARNING:
The print head orifice plates (bottom surface) may be hot.
Do not touch them with your bare hands, and proceed with caution.
It is recommended that you use this opportunity to also clean the roller and
the UV-lamp lens (to the right of the print heads).
