Copyright 2010-2017 Obihai Technology, Inc.
257
displaying a Caller ID Name on the recipient’s device
DigitMap
Digit map to restrict numbers that can be dialed or called
with this service. See
OBi Call Routing and Digit Map Section
for a description of the syntaxes for specifying a Digit Map.
(<ob>xxxxxxxxx|obxxxxxxxxx)
InboundCallRoute
Routing rule for directing incoming calls on this service. The
default rule is to send all incoming calls to the PHONE port
(ph). See
OBi Call Routing and Digit Map Section
for a
description of the syntaxes for specifying this parameter
ph,ph2
RingProfile
Select a Ring Profile to ring the PHONE port with when an
incoming call is routed to the PHONE port. Choices are A, or
B
A
CodecProfile
Select a Codec Profile to be used for all calls on this service.
Choices are A, or B.
A
DefaultRing
Default ring pattern number to ring the PHONE port for
incoming calls on this trunk that are routed to the PHONE
port according to the InboundCallRoute of this service. The
ring pattern is taken from the selected Ring Profile. Valid
choices are 1-10
2
CallOnHoldRing
Pattern to ring PHONE port when holding a call on this
trunk that has been connected to the PHONE port. Typically
this is a very short distinctive ring pattern that serves as a
reminder to the user that a call is being on hold. The ring
pattern is taken from the selected Ring Profile. Valid choices
are: NO Ring, or 1-10
8
RepeatDialRing
The ring pattern number to use to ring the PHONE port
when a repeat dial operation on this trunk is successful as
the called party is either ringing or answered
4
DTMFMethod
Method to pass DTMF digits to peer device. Available
choices are:
Inband - DTMF tone are sent as inband audio signal
RFC2833 - DTMF tone events are relayed per RFC2833
SIPInfo - DTMF tones are relayed with SIP INFO request
Auto - Method to use based on call setup negotiation
(either Inband or RFC2833 may be negotiated)
Auto
UseFixedDurationRFC2833DTMF
When relaying DTMF digit events on this trunk using
RFC2833, the RFC2833 RTP packets normally will keep
streaming for as long as the digit is pressed. With this
option set to TRUE, the device sends only one RTP digit
event packet with a fixed duration of 150 ms regardless
how long the digit has been pressed
false
Calling Features (VoiceService.1.X_P2P.1.CallingFeatures.)
CallForwardUnconditionalEnable
Enable call forwarding of all calls unconditionally by the
device. If CallForwardUnconditionalNumber is blank, this
parameter is treated as if it has been set to
No
.
Note: It is possible for a user to set this parameter from the
phone using a Star Code
false
CallForwardUnconditionalNumber
Directory number to forward all incoming calls on this
service unconditionally. Maximum Length is 127 characters.
Note: It is possible for a user to set this parameter from the