Copyright 2010-2017 Obihai Technology, Inc.
68
-
MediaLoopbackAnswerDelay
–
The delay in milliseconds before the OBi answers a media loopback call.
Default is 0.
-
MediaLoopbackMaxDuration
–
The maximum duration to allow for an incoming media loopback call.
Default is 0, which means the duration is unlimited.
Note that the device will reject an incoming media loopback call if:
-
Phone is off hook.
-
Phone port is ringing.
-
One or more calls are on hold.
The device will terminate an inbound media loopback call already in progress when:
-
Phone is off-hook.
-
Phone port is ringing.
To make an outgoing loopback call, the user can dial one of the following star codes before dialing the target number:
-
*03
–
Make a Media Loopback Call.
-
*04
–
Make a RTP Packet Loopback Call.
Note that outbound Media Loopback Call is not subjected to call duration limit; it will last until the user hangs up or
until the called device ends the call.
A SIP/SP Configuration Example
The following table details a configuration example where the ITSP Profile to use is B with two SP services, SP1 and SP3,
both pointing to the same ITSP Profile.
Parameter Group
Parameter
Example Value
Notes
ITSP Profile B
–
General
SignalingProtocol
SIP
Standard default value is
SIP
ITSP Profile B
–
SIP
ProxyServer
sip.phonepower.com
ITSP Profile B
–
SIP
OutboundProxy
sbc.phonepower.com
ITSP Profile B
–
SIP
OutboundProxy
SP1 Service
X_ServProvProfile
B
SP1 Service
–
Credentials
AuthUserName
3409991003
SP1 Service
–
Credentials
AuthPassword
i9cik#dkL
SP1 Service
–
Credentials
X_MyExtension
1003
SP3 Service
X_ServProvProfile
B
SP3 Service
–
Credentials
AuthUserName
3409991005
SP3 Service
–
Credentials
AuthPassword
c98dfa74{
SP3 Service
–
Credentials
X_MyExtension
1005
Phone Settings
PrimaryLine
SP3
