Copyright 2010-2017 Obihai Technology, Inc.
260
<N> = 1-10
SpacedUsed
This is a read-only status parameter. It shows the amount of recording
space used in number of milliseconds
SpaceAvailable
This is a read-only status parameter. It shows the amount of recording
space remaining in number of milliseconds
Auto Attendant (VoiceService.1.X_AA.1.)
Enable
Enable AA. If enabled, the AA will answer an incoming call that has
been routed to it after a period as specified in AnswerDelay. If
disabled, the AA will not attempt to answer any incoming call.
true
DigitMap
Once the AA answers an incoming call, it presents the caller with an
option to make a further call using one of the available voice services
on the device. This Digit map serves to restrict the numbers that can
be dialed or called via this AA option.
See
OBi Call Routing and Digit Map Section
for a description of the
syntaxes to specify a digit map.
([1-9]x?*(Mpli)|
[1-9]|[1-9][0-9]|
<00:$1>|[0-8]|
**1(Msp1)|
**2(Msp2)|
**3(Msp3)|
**4(Msp4)|
**8(Mbt)|
**9(Mpp)|
(Mpli))
OutboundCallRoute
After the caller dials a number that is acceptable by the AA (according
to its DigitMap) to make a further call, the device uses this outbound
call routing rule to determine which service to make this call with.
See
OBi Call Routing and Digit Map Section
for a description of the
syntaxes to specify this parameter.
{([1-9]x?*(Mpli)):pp},
{0:ph},
{(<**1:>(Msp1)):sp1},
{(<**2:>(Msp2)):sp2},
{(<**3:>(Msp3)):sp3},
{(<**4:>(Msp4)):sp4},
{(<**8:>(Mbt)):bt},
{(<**9:>(Mpp)):pp},
{(Mpli):pli}
PrimaryLine
By primary line we mean the service that does not require any access
code prefix (such as **1 or **9) when dialing; it is the default service
to be used for making the call when no explicit access code prefix is
entered. This parameter indicates to the device which voice service is
considered as the primary line when dialing out via the Auto
Attendant. Available choices are:
SP1 Service
(code = sp1)
SP2 Service
(code = sp2)
SP3 Service
(code = sp3)
SP4 Service
(code = sp4)
SP5 Service
(code = sp5)
SP6 Service
(code = sp6)
OBiTALK Service (code = pp1)
OBiBluetooth
(code = bt1)
Trunk Group 1
(code=tg1)
Trunk Group 2
(code=tg2)
The OBi device process the parameter by substituting of the
SP1 Service
