Copyright 2010-2017 Obihai Technology, Inc.
194
-
Mobile Num (mobile)
-
Home Num (homePhone)
One of more of these search fields may be specified per query; all the search criteria are AND’d together to form the
search filter, and the value is case-insensitive. To specify partial match of an attribute value, use a
*
wildcard character.
For example: set Last Name =
s*
to query all entries with the sn that starts with an s or S.
You can customized the search fields to present to the user by specifying the fields in the
QueryFields
parameter. This
is a comma separated list of fields. Refer to the LDAP setup parameter table above for the syntax.
Result Fields
The search results are presented in a table where a Name, a Number, and a Picture are shown, when the values are
available. Which LDAP attributes in the result are to be used for the Name, Number, and Picture display can be
controlled by setting the parameters
NameFieldPreference
,
NumberFieldPreference
, and
PhotoFieldPreference
parameters. Each of these parameters is a comma separated list of LDAP attributes
arranged in order of preference. The first attribute in the list that has a non-empty value is used for the corresponding
display field.
User can see more attribute values of an entry by highlighting the entry on the top-level search result table and press
the OK key on the phone. This brings up the
LDAP Result Details
screen of the selected entry. You can customize the
attributes to display on this screen with the parameter
ResultsFields
which is a comma separated list of fields to
present to the user. Refer to the LDAP setup parameter table for the syntax of this parameter.
