Oase Pontec Multi Clear Set 5000, Operating Instructions Manual

Page: 17 / 136

- EN -
17
Fitting the UVC clarifying unit
How to proceed:
 G
1. Check the O ring at the unit head for damage and replace if necessary.
2. Carefully push the quartz glass into the opening and the unit head onto the housing.
– Ensure that the tenons of the housing engage in the grooves of the bayonet closure.
3. Turn the unit head clockwise against the stop while applying slight pressure.
– Ensure that the arrows on the UVC unit head and UVC water housing are aligned.
Replacing the UVC lamp
Replace the UVC lamp after max. 8000 operating hours.

To replace the UVC lamp, remove the UVC clarifying unit and refit after completion of the work. (

Cleaning the
UVC clarifying unit)

Ensure that the identification and capacity data of the lamps used correspond to the information on the unit type
plate. (

Technical data)

Prior to inserting the UVC lamp, check the quartz glass and O ring for damage and replace if necessary.
How to proceed:

H
1. Loosen the self-tapping screw until the the screw tip is sunk in the housing of the clamping screw.
2. Unscrew the clamping screw counter-clockwise.
3. Remove the quartz glass including the O ring towards the front with a slight turning movement.
4. Pull out the UVC lamp and replace.
5. Push the quartz glass including the O ring as far as the stop in the unit head.
– Clean the O ring, replace if damaged.
– Ensure that the O ring is located in the gap between the unit head and the quartz glass.
6. Tighten the clamping screw clockwise up to the stop.
7. Tighten the self-tapping screw.
Storage/Over-wintering
Take the unit out of operation at water temperatures below +4 °C or, at the latest, when freezing temperatures are to
be expected.

Drain the unit as far as possible, clean thoroughly and check for damage.

Empty all hoses, pipes and connections as far as possible.
Disposal
Use our return system for disposal. Always make electrical
units unusable by cutting the cables! Disposal with the household waste:
UVC unit (electronics!) Packaging
UVC lamp (mercury!) Worn foam filters, sealing rings
Filter container
Guarantee conditions
PfG grants a 2 year guarantee from the date of sale on proven material and manufacturing faults. Prerequisite for our
guarantee is the presentation of the purchase receipt. Our guarantee will become null and void if the unit is misused,
electrically or mechanically damaged by inappropriate use and improper repair by non-authorised workshops. Repairs
are reserved for workshops authorised by PfG or by PfG itself. In the case of warranty claims, please return the defec-
tive unit or part freight paid to PfG together with a description of the fault and the purchase receipt. PfG reserves the
right to invoice repair costs. PfG is not liable for transport damage. Any damage must be claimed against the carrier.
Further claims of whatever type, especially consequential damage, are excluded. This guarantee does not affect the
final customer’s claims against the dealer.