D 8.4.1.10
13
12. OXYGEN IN
Connect your oxygen source to this socket to ensure the device
can receive and regulate the oxygen flow.
2.2
Installation
To install O
2
matic HOT:
a)
Place the O
2
matic HOT near yourself at a flat surface, such as a table.
b)
Connect the AC power adapter to the wall outlet and to the O
2
matic HOT
device power plug.
Warning
Only use the AC power adaptor provided by O
2
matic. Any other power
supply may interfere with the proper operation of the device.
c)
Connect the oxygen hose to your source of oxygen like a concentrator or an
oxygen cylinder. Then connect oxygen hose to the oxygen inlet of the O
2
matic
HOT.
d)
Connect the oxygen output to your oxygen mask or nasal cannula and put on
the mask.
e)
Turn on the O
2
matic HOT by pressing and holding down
for 4 seconds.
The O
2
matic HOT device should now be turned on.
Warning
The nasal catheter needs to be placed in the correct position during
treatment. Contact your service provider if you are in doubt.
Summary of Contents for HOT 100
Page 1: ...2020 10 29 ...
Page 15: ...D 8 4 1 10 15 ...
Page 26: ...O2matic HOT end user manual 26 Notes ...
Page 27: ...D 8 4 1 10 27 Notes ...
