NWA3D A31 User Manual
A
B
3. Install the two T-shaped frame reinforcement plates. The plate with a limit
switch goes on the left (the side with the leadscrew). The plate with no limit
switch goes on the right.
a. Loosen the t-nuts by hand so that they will fit into the grooves on the
frames. You want the nuts to be loose so that when you tighten the bolts,
the nuts will rotate 90°C and grab onto the inside of the groove.
b. Align the nuts to the grooves and insert the T-shaped plates into the
frames.
c. Tighten all eight bolts using the M4 hex key (Allen) wrench.
© 2018 NWA3D LLC
4
