NWA3D A31 User Manual
Rotate Tool:
m. When you are satisfied with the Cura settings and the position,
orientation, and scale of the model, you are ready to print! Insert your
microSD card that came with your printer into your computer and
select “Save to Removable Drive” to save the file to the microSD card.
Pro Tip:
You can also save the file to the computer by selecting “Save
to File” or connect your printer to your computer and print over USB
using the “Monitor” feature.
3. Send the file to the printer
a. Remove the microSD card from the computer.
b. Insert the microSD card, upside down, into the slot on the side of the
A31 control box. The contacts on the card should be facing up.
c. By using this method, no computer needs to be plugged into your
printer and it will run autonomously until the print is finished.
4. Print!
a. On the NWA3D A31 control screen, select Refresh SD card (the last
selection on the bottom of the main screen). and select “Print from
SD.”
b. Select your print (.Gcode) file.
c. Watch the 3D printer create your model!
© 2018 NWA3D LLC
25
