NWA3D A31 User Manual
i.
The document “Complete Cura Settings for NWA3D A31.pdf” is
included on the microSD card. Refer to it if you want to compare your
settings. The images in that document show
all
the settings for the
NWA3D A31 Cura profile. You can always reset your settings to the
original default NWA3D A31 settings by importing the “NWA3D A31
Printer Profile” from the microSD card.
j.
You may need to check “Generate Support” and select the
“Everywhere” support placement, depending on the shape of the part
you are printing. Also, you can change the layer height from 0.2mm to
0.1mm for a smoother, higher quality part, although the print will take
longer.
k. As you become more advanced with 3D printing, you may want to
experiment with many settings. Remember that you can always revert
to these default settings at any time by reloading the “NWA3D A31
Printer Profile.curaprofile” on your microSD card, or ask us for help
by filling out a
Troubleshooting Request
.
l.
Load a model file in Cura. Rotate and move the file to the best
orientation for printing. You may want to scale the file at this point as
well.
Scale Tool:
© 2018 NWA3D LLC
24
