NWA3D A31 User Manual
5.
Loading and Removing Filament
Video Tutorial:
How to remove clogs, load, and change filament
1. Loading filament
a. Load a spool of filament into the spool holder.
b. Cut the end of the filament at an angle so the irregular melted plastic at
the end doesn’t cause a clog. It will also be easier to feed into the extruder
and Bowden tube.
c. Feed the end of the filament into the extruder by hand as you squeeze the
extruder release lever.
d. Push the filament all the way through the Bowden tube until it stops
when it hits the back of the nozzle.
e. Select Setup > Preheat PLA.
© 2018 NWA3D LLC
16
