© by N&W GLOBAL VENDING S.p.A.
20
03-2012 3775 00
DISK PRICES
This function allows changing the sale price for all the
compartments of a disk, limited to the 0 time band and
for every day of the week.
MANAGEMENT OF THE COIN BOX TUBES
By entering the "Tube management" function, it is pos-
sible to manually load or empty the coin box tubes.
By confirming the loading operation, the display shows
“Credit : ——” which is the amount of money in the tubes
available for being returned; if you introduce the coin in the
validator, the display will increase the amount of money in
the tubes which is available for being returned.
By confirming the emptying operation, it is possible to
establish on which of the tubes to intervene. Every time the
confirmation key is pressed
�
, a coin is ejected from the
active tube
AIR FLOW SETTING
The incoming flow of air from the central column, can
be modified on each disk by adjusting the respective
calibration screw.
To operate the screws it is necessary to line the screws and
the holes on each disk.
This function allows rotating the whole column, when a
loading button is pressed, until the calibration screws face
the operator.
It is also possible to unlock each disk to manually rotate
until the hole matches the regulation screw.
TEST
D
isks
This function allows testing the operation of the rotation
of the disks by pressing the loading buttons.
With this function, pressing loading buttons
doesn't
change a disk and/or slot status
(full/empty/expired).
s
alE
Doors
This function allows checking the operation of the selec-
tion buttons without activating disk rotation.
With this function, pressing loading buttons
doesn't
change a disk and/or slot status
(full/empty/expired).
c
omplEtE
sElEctioN
allows simulating the normal products distribution
without inserting any money
With this function, pressing loading buttons
doesn't
change a disk and/or slot status
(full/empty/expired).
GSM
This function is active only if the vending machine
is properly set and connected to a GSM data trans-
mission device.
The control software is capable of sending, via GSM mo-
dem, a notification of faulty machine or “alerts” of “prod
-
uct running out”, after a certain number (programmable)
of dispensed items of a product. This function allows you
to reset the counters which manage the alerts.
a
larm
rEsEt
This function allows you to reset the counters which
manage the alerts.
EVADTS
EVA DTS communication protocol (European Vending
Associations Data Transfer System) allows the machine
to dialog with the data transfer terminal:
c
oNNEctioN
By activating this function, the machine waits for the con-
nection with a statistics activation machine EVA DTS.
Summary of Contents for Festival
