NW Global Vending Festival, Installation - Use - Maintenance

Page: 19 / 60

© by N&W GLOBAL VENDING S.p.A.
13
03-2012 3775 00
Chapter 2
INSTALLATION
The installation and the subsequent maintenance
operations shall be carried out with the machine con-
nected to the power supply and therefore by specialised
personnel, trained for the use of the machine who has
been informed of the specific risks deriving from such a
situation.
This machine is NOT suitable for the following type
of installations::
-Outdoors, the machine shall be installed in dry prem-
ises, with a temperature between 5° and 34° C.
-in environments with a humidly rate higher than 65%;
-in environments in which jets of water are used for clean-
ing (i.e.: large kitchens, etc.).
The machine shall be positioned so that the maxi-
mum inclination does not exceed 2°; if needed, level
it out using the appropriate adjustable feet provid-
ed with the machine.
MAIN SWITCH
The electrical panel (see fig. 18) is fitted with a micro-
switch that disconnects the voltage supply to the elec-
tric system of the machine when the payment systems
removable compartment is open.
Inside the machine, only those parts which are protected
by covers and which are highlighted with a label "discon-
nect voltage before removing the cover" remain live.
Before removing these covers it is necessary to dis-
connect the power supply cable from the mains.
To give power to the system when the removable com-
partment is open, just insert the appropriate key in the
hole in the main switch.
Warning!!!
When power is given to the machine with the door
open, the lighting of the window is switched on: DO
NOT look directly into the light sources.
3 2 1 4
Fig. 11
1- Main switch
2- Open door switch
3- loading switch
4- Fuses
UNPACKING AND POSITIONING
After removing the packaging, verify the integrity of the
machine.
In case of doubt, do not use the machine.
The packaging materials (plastic bags, expanded
polystyrene, nails, etc.) shall be kept out of the
reach of children as they are a potential source of
danger.
The packaging needs to be disposed authorised spaces.
Recyclable materials shall be given to specialised recy-
cling companies.
If the vending machine had been laid down for
transportation, wait al least an hour before connect-
ing it to the mains.
The machine is not suitable for outside installations, it
needs to be installed inside dry premises away from
heat sources , with temperature between 2° and 32° C
and it cannot be installed in environments in which jets
of water are used for cleaning (i.e.: large kitchens, etc.).
The machine shall be positioned so that the maximum
inclination does not exceed 2°. If needed, level it out using
the appropriate adjustable fee.
1
3 4 2
5
Fig. 12
1- Quick-fit
2- Clips
3- Air duct
4- Fixing flaps
5- Adjustable foot
Warning!!!
The machine shall be positioned next to a wall away
from sources of heat and in such a way that the
back of it is at a minimum distance of 100mm from
the wall in order to allow regular ventilation.
The air deflector provided (100 mm) must shall be
mounted on the back of the machine by means of the
respective clips.