PSI
7
The monitor will advance to the next sensor location to install. Repeat the
same steps to complete the installation on all tires you will be monitoring.
SPARe TIReS:
We recommend monitoring your spare tire so that
you know it is ready in the event of a tire failure. If you don’t want to
monitor this tire, move the curser to “NO” while this tire is blinking
and press “OK” to confirm. The system will advance to the next tire.
IMPORTANT
: After you press on the last sensor in memory
position 1, monitor will advance to memory position 2 to install
your next vehicle or trailer configuration.
Press to move to Memory Position 2 and repeat the same steps
as you did for Memory Position 1 to complete your installation.
Once you have installed all of your vehicles or trailers you wish to
monitor. Use the navigational buttons and scroll to “SAVE” and
Press to exit Define Mode and enter Vehicle Position Mode.
PSI
PSI
The front left tire will begin flashing. This is where the first sensor
needs to be attached
Screw the sensor on the valve stem
The “YES” icon on the screen will be flashing. Wait for the correct
pressure to appear
Press after the correct pressure appears on the monitor
