18
EDITING SETTINGS
ADDING/DeLeTING SeNSORS
Once you have completed your vehicle/towed vehicle selections, you will be able to add or delete specific
tire or sensor locations. For example, you may need to change out a sensor due to a low battery. Follow the steps
below to complete:
To add a sensor, Press the “Sensor Edit” Button on the monitor.
Move to the specific tire, press
This will illuminate “YES/NO”. To add, “YES” will be flashing and confirm by pressing .
Install sensor on corresponding tire and wait for the correct tire pressure reading.
Press to confirm and to accept sensor.
To delete, select “NO” and press
Press “Sensor Edit” Button to save and exit Sensor Edit Mode
