PSI
8
VehICLe POSITION MODe
After saving your last memory position the system advances to Vehicle Position
Mode. This mode allows you to choose among the vehicles or trailers you have
stored.
TIP
: In Vehicle Position Mode all defined vehicles or trailers will display
on the RIGHT side of the screen. Once positions are selected for front
and or back, the icons will display in the assigned positon.
“FRONT” icon is flashing, Press
Select the memory position you wish to monitor in the “FRONT” (The front
vehicle will be located on the LEFT hand side of the screen in normal mode)
Press to confirm
“BACK” icon is flashing, Press
Select the memory position you want to monitor in the “BACK” (The back
vehicle will be located on the RIGHT hand side of the screen in normal mode).
Press to confirm.
If you only want to monitor 1 vehicle, select “FRONT” or “Back” for
that vehicle. Then scroll to “SAVE” and Press to advance to
normal mode.
TIP
: Only 1 “Front” and 1 “Back” Vehicle Configuration can be monitored
at a time.
“SAVE” icon will be flashing on the screen. Press to save your vehicle
configuration and advance to normal mode.
PSI
PSI
