11
BOOSTING YOUR SIGNAL
RF (Radio Frequency) signals are commonly used in wireless devices. The RF frequencies in your nVISION TPMS
system conform to all FCC Rules.
The RF system in your TPMS device has been designed to use normal objects in the environment to reverberate
signals from the wheels to the monitor. In normal use, most environments will provide the necessary impediments
to reverberate signals.
You may have occasion where an absence of objects on one side of your vehicle may not allow certain sensor
signals to be received by the monitor. If this should happen, you will receive a missing sensor signal. While this
error is likely to be rare, it can occur.
Different vehicles and longer distances can also affect the quality of your signal reception. If you are
experiencing excessive missing sensor notifications, we recommend you add an nVISION
®
Repeater.
This is available at a modest additional cost through our Customer Care Team (800) 835-0129.
30300VA
TPMS Repeater
