AV Sync
Use of an AV Receiver with HDMI for video may result in audio lagging behind video. First try
using the receiver AV sync settings to calibrate. If this does not work, use the AV sync slider
utility in Settings
> Display & sound > Advanced settings > Audio video sync to calibrate for
any audio delay. The AV sync slider allows you to advance audio by 1 second (in small
increments of 10ms) to synchronize the audio and video.
Note that this tool is effective only when SHIELD is connected to your AV Receiver over HDMI
(i.e. audio/video over HDMI); it is not meant to be used when a headset is plugged into SHIELD
Controller/SHIELD Remote or USB audio device or Bluetooth audio device.
If video lags behind audio (i.e. audio is ahead of video) then use your AV receiver’s settings to
delay audio.
Adjust for Overscan
For TVs that don't provide their own overscan settings, use this setting to adjust the picture size
to fit the screen.
Go to Settings
> Display & Sound > Advanced Settings > Adjust for overscan to resize the
picture on your TV or display. Use the UP and DOWN d-pad buttons on your remote or
controller to maximize the picture on your TV. Make sure the green triangles are completely
visible to avoid overscan.
About SHIELD Screen
Details about serial, software and firmware version numbers can be found in your SHIELD TV
About screen.
To access this information, from the SHIELD TV screen, go to Settings
, and under "Device,"
select About
.
It is also possible to manually apply system updates by selecting "System upgrade."