Nvidia DGX Station A100 User Manual Download Page 8 | Manualshive

Page: 8 / 72

Nvidia DGX Station A100 User Manual Download Page 8

Introduction to the NVIDIA DGX Station

™

A100

DGX Station A100

DU-10189-001 _v5.0.2 | 2

Registration allows you to access the NVIDIA Enterprise Support Portal, obtain technical
support, get software updates, and set up an NGC for DGX systems account. If you did not
receive the information, open a case with the NVIDIA Enterprise Support Team at

1.2.

What's in the Box

‣

DGX Station A100

‣

NVIDIA DGX Station

™

A100

‣

Accessory boxes containing the following items:

‣

Quick Start Guide

‣

AC power cable with a locale-specific grounded connector

‣

Mini DisplayPort 1.2 to DisplayPort

‣

USB recovery flash drive containing:

‣

Source code of the open-source software that is installed on DGX Station

™

A100

‣

Toxic Substance Notice and Safety Instructions

‣

Declaration of Conformity

‣

Wheel locks
Wheel locks are provided to prevent the unit from rolling out of place. To install these

locks, from the side, slide them under two of the wheels.

Inspect each piece of equipment in the packing box. If anything is missing or damaged, contact

your supplier.

Before

you get started, you need to first unpack DGX Station A100. See

Unpacking your DGX

for more information.

1.3.

DGX OS Software Summary

The DGX OS software that is supplied with the DGX Station A100 includes the software that you

need for downloading and running containers for deep learning frameworks. The software is

already installed on the DGX Station A100, except where licensing requirements mandate that

the software be supplied separately. Any software that must be supplied separately is installed

automatically when the DGX Station A100 is first powered on.
For details about the DGX OS software, refer to the

DGX OS Software Release notes

«
...
6
7
8
9
10
...
»

Summary of Contents for DGX Station A100









































































Reviews:

No comments