manualshive.com logo in svg

Nvidia DGX Station A100, User Manual, Page: 51 / 72

Share
Download
Nvidia DGX Station A100 User Manual Download Page 51

DGX Station A100

DU-10189-001 _v5.0.2   |   45

Appendix B. Safety

To reduce the risk of bodily injury, electrical shock, fire, and equipment damage, read

this document and observe all warnings and precautions in this guide before installing or

maintaining your product. NVIDIA products are designed to operate safely when installed

and used according to the product instructions and general safety practices. The guidelines

included in this document explain the potential risks associated with computer operation and

provide important safety practices designed to minimize these risks.
The product is designed and tested to meet IEC 60950-1 and IEC 62368-1, the Standard for the

Safety of Information Technology Equipment. This also covers the national implementation

of IEC 60950-1 or IEC 62368-1-based safety standards around the world, for example, UL

62368-1. These standards reduce the risk of injury from the following hazards:

‣

Electric shock

: Hazardous voltage levels contained in parts of the product

‣

Fire

: Overload, temperature, material flammability

‣

Mechanical

: Sharp edges, moving parts, instability

‣

Energy

: Circuits with high energy levels (240 volt amperes) or potential as burn hazards

‣

Heat

: Accessible parts of the product at high temperatures

‣

Chemical

: Chemical fumes and vapors

‣

Radiation

: Noise, ionizing, laser, ultrasonic waves

Retain and follow all product safety and operating instructions. Always refer to the

documentation supplied with your equipment. Observe all warnings on the product and in the

operating instructions.

 

 

WARNING: FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE,

ELECTRIC SHOCK OR OTHER INJURY OR DAMAGE. ELECTRICAL EQUIPMENT CAN BE

HAZARDOUS IF MISUSED. OPERATION OF THIS PRODUCT, OR SIMILAR PRODUCTS, MUST

ALWAYS BE SUPERVISED BY AN ADULT. DO NOT ALLOW CHILDREN ACCESS TO THE

INTERIOR OF ANY ELECTRICAL PRODUCT AND DO NOT PERMIT THEM TO HANDLE ANY

CABLES.

B.1.  Intended Application Uses

This product was evaluated as Information Technology Equipment (ITE), which may be

installed in offices, schools, computer rooms, and similar commercial type locations. The

suitability of this product for other product categories and environments (such as medical,

Summary of Contents for DGX Station A100









































































Reviews:

No comments