Nvidia DGX Station A100 User Manual Download Page 53 | Manualshive

Page: 53 / 72

Nvidia DGX Station A100 User Manual Download Page 53

Safety

DGX Station A100

DU-10189-001 _v5.0.2 | 47

‣

Do not disable the power cable grounding plug. The grounding plug is an important safety
feature.

‣

Do not place objects on power cables. Arrange them so that no one may accidentally step
on or trip over them.

‣

Do not pull on a cable. When unplugging the product from the electrical outlet, grasp the
plug.

‣

When possible, use one hand only to connect or disconnect cables.

‣

Do not modify power cables or plugs. Consult a licensed electrician or your power
company for site modifications.

Power Supply

‣

Ensure that the voltage and frequency of your power source match the voltage and
frequency inscribed on the equipment’s electrical rating label. If you have a question about
the type of power source to use, contact your authorized service provider.

‣

Connect the equipment to a properly wired and grounded electrical outlet and always
follow your local or national wiring rules.

‣

Ensure that the socket outlet is near the equipment and is readily accessible for
disconnection.

‣

To help protect your system from sudden, transient increases and decreases in electrical
power, consider using a surge suppressor or line conditioner.

‣

Never force a connector into a port. Check for obstructions on the port. If the connector
and port don’t join with reasonable ease, they probably don’t match. Make sure that
the connector matches the port and that you have positioned the connector correctly in
relation to the port.

‣

Do not open the power supply. Hazardous voltage, current and energy levels are present
inside the power supply. The power supply in this product contains no user-serviceable
parts. Return to manufacturer for servicing.

B.4. Communications Cable Precautions

To reduce the risk of exposure to electrical shock hazards from communications cables:

‣

Do not connect communications cables during an electrical storm. There may be a risk of

electric shock from lightning.

‣

Do not connect or use communications cables in a wet location.

‣

Disconnect the communications cables before opening a product enclosure, or touching or

installing internal components.

«
...
51
52
53
54
55
...
»

Summary of Contents for DGX Station A100









































































Reviews:

No comments