manualshive.com logo in svg

Nvidia DGX Station A100, User Manual, Page: 22 / 72

Share
Download
Nvidia DGX Station A100 User Manual Download Page 22

Getting Started with DGX Station A100

DGX Station A100

DU-10189-001 _v5.0.2   |   16

***NOTE: In case a device doesn't have P2P access to other one, it falls back to

 normal memcopy procedure.

So you can see lesser Bandwidth (GB/s) and unstable Latency (us) in those cases.
P2P Connectivity Matrix

     D\D     0

     0      1

Unidirectional P2P=Disabled Bandwidth Matrix (GB/s)

   D\D     0

     0 176.20

Unidirectional P2P=Enabled Bandwidth (P2P Writes) Matrix (GB/s)

   D\D     0

     0 187.87

Bidirectional P2P=Disabled Bandwidth Matrix (GB/s)

   D\D     0

     0 190.77

Bidirectional P2P=Enabled Bandwidth Matrix (GB/s)

   D\D     0

     0 190.53

P2P=Disabled Latency Matrix (us)

   GPU     0

     0   3.57
   CPU     0

     0   4.07

P2P=Enabled Latency (P2P Writes) Matrix (us)

   GPU     0

     0   3.55
   CPU     0

     0   4.07
NOTE: The CUDA Samples are not meant for performance measurements. Results may vary

 when GPU Boost is enabled.

2.4. 

Completing the Initial Ubuntu OS

Configuration

When you power on the DGX Station A100 for the first time, you are prompted to accept end
user license agreements for NVIDIA software. You are then guided through the process for
completing the initial Ubuntu OS configuration.

For the complete procedure, refer to the 

NVIDIA DGX OS 5 User Guide

.

Summary of Contents for DGX Station A100









































































Reviews:

No comments