Nvidia DGX Station A100 User Manual Download Page 18

Page: 18 / 72

Getting Started with DGX Station A100

DGX Station A100

DU-10189-001 _v5.0.2 | 12

lab@ro-dvt-058-80gb:/usr/local/cuda-11.2/samples/bin/x86_64/linux/release $

p2pBandwidthLatencyTest

[P2P (Peer-to-Peer) GPU Bandwidth Latency Test]

Device: 0, Graphics Device, pciBusID: 1, pciDeviceID: 0, pciDomainID:0

Device: 1, Graphics Device, pciBusID: 47, pciDeviceID: 0, pciDomainID:0

Device: 2, Graphics Device, pciBusID: 81, pciDeviceID: 0, pciDomainID:0

Device: 3, Graphics Device, pciBusID: c2, pciDeviceID: 0, pciDomainID:0

Device: 4, DGX Display, pciBusID: c1, pciDeviceID: 0, pciDomainID:0

Device=0 CAN Access Peer Device=1

Device=0 CAN Access Peer Device=2

Device=0 CAN Access Peer Device=3

Device=0 CANNOT Access Peer Device=4

Device=1 CAN Access Peer Device=0

Device=1 CAN Access Peer Device=2

Device=1 CAN Access Peer Device=3

Device=1 CANNOT Access Peer Device=4

Device=2 CAN Access Peer Device=0

Device=2 CAN Access Peer Device=1

Device=2 CAN Access Peer Device=3

Device=2 CANNOT Access Peer Device=4

Device=3 CAN Access Peer Device=0

Device=3 CAN Access Peer Device=1

Device=3 CAN Access Peer Device=2

Device=3 CANNOT Access Peer Device=4

Device=4 CANNOT Access Peer Device=0

Device=4 CANNOT Access Peer Device=1

Device=4 CANNOT Access Peer Device=2

Device=4 CANNOT Access Peer Device=3

***NOTE: In case a device doesn't have P2P access to other one, it falls back to

normal memcopy procedure.

So you can see lesser Bandwidth (GB/s) and unstable Latency (us) in those cases.
P2P Connectivity Matrix

D\D 0 1 2 3 4

0 1 1 1 1 0

1 1 1 1 1 0

2 1 1 1 1 0

3 1 1 1 1 0

4 0 0 0 0 1

Unidirectional P2P=Disabled Bandwidth Matrix (GB/s)

D\D 0 1 2 3 4

0 1323.03 15.71 15.37 16.81 12.04

1 16.38 1355.16 15.47 15.81 11.93

2 16.25 15.85 1350.48 15.87 12.06

3 16.14 15.71 16.80 1568.78 11.75

4 12.61 12.47 12.68 12.55 140.26

Unidirectional P2P=Enabled Bandwidth (P2P Writes) Matrix (GB/s)

D\D 0 1 2 3 4

0 1570.35 93.30 93.59 93.48 12.07

1 93.26 1583.08 93.55 93.53 11.93

2 93.44 93.58 1584.69 93.34 12.05

3 93.51 93.55 93.39 1586.29 11.79

4 12.68 12.54 12.75 12.51 140.26

Bidirectional P2P=Disabled Bandwidth Matrix (GB/s)

D\D 0 1 2 3 4

0 1588.71 19.60 19.26 19.73 16.53

1 19.59 1582.28 19.85 19.13 16.43

2 19.53 19.39 1583.88 19.61 16.58

3 19.51 19.11 19.58 1592.76 15.90

4 16.36 16.31 16.39 15.80 139.42

Bidirectional P2P=Enabled Bandwidth Matrix (GB/s)

D\D 0 1 2 3 4

0 1590.33 184.91 185.37 185.45 16.46

1 185.04 1587.10 185.19 185.21 16.37

2 185.15 185.54 1516.25 184.71 16.47

Summary of Contents for DGX Station A100









































































Search results

Summary of Contents for DGX Station A100

Reviews:

Nvidia DGX Station A100, User Manual, Page: 18 / 72

Search results

Summary of Contents for DGX Station A100

Reviews: