manualshive.com logo in svg

Nvidia DGX Station A100, User Manual, Page: 28 / 72

Share
Download
Nvidia DGX Station A100 User Manual Download Page 28

Using the BMC

DGX Station A100

DU-10189-001 _v5.0.2   |   22

We 

strongly

 recommend that you change your password. If you do not change your password,

anyone can use the default passwords and log in to the BMC.

3.6. 

Logging in After Entering an

Incorrect Password

After you enter an incorrect login BMC password at leat 5 times, you will be locked out. Here is

some important information about how you can log in to the BMC again.
After entering incorrect passwords at least 5 times, you will be locked out for 10 minutes

before you can attempt to log in again. During this 10-minute period, if you enter an incorrect

password again, the lockout period is extended.
The lockout period is calculated in the following way:

10 minutes * (failure count - 5 tolerances)

For example, if you entered incorrect passwords 7 times, you must wait for 20 minutes 

(10 * (7

– 5)

 before you can log in again.

Important:

 The start of the current lockout period is calculated from the 

latest

 incorrect

password that you entered and 

not

 from the first lock time.

If you need to unlock users immediately, you must reset the BMC.

3.7. 

Common BMC Tasks

This section provides information about the most common tasks you can complete in the BMC.

3.7.1.  Configuring the BMC Login Credentials

Here is some information about how to add or remove users from the BMC.

 1. Log into the BMC.
 2. In the left navigation pane, click 

Settings

.

 3. Click the 

User Management

 card.

Summary of Contents for DGX Station A100









































































Reviews:

No comments