Nvidia DGX Station A100 User Manual Download Page 41 | Manualshive

Page: 41 / 72

Nvidia DGX Station A100 User Manual Download Page 41

Managing Self-Encrypting Drives on DGX Station A100

DGX Station A100

DU-10189-001 _v5.0.2 | 35

5.9.

Configuring Trusted Computing

This section provides information about how to configure trusted computing.
The DGX Station A100 system BIOS provides setup controls to configure the following Trusted

Computing (TC) features:

‣

Trusted Platform Module
DGX Station A100 incorporates Trusted Platform Module 2.0 (TPM 2.0), which can be

enabled from the system BIOS. After this module is enabled, the

nv-disk-encrypt

tool

uses the module to encrypt and store the vault and SED authentication keys.
Using the TPM is preferred because that allows the vault data to persist even if the system

gets re-imaged.

5.9.1. Enabling the TPM

Here are the instructions to enable the TPM.

1. Reboot the DGX Station A100.
2. To enter the BIOS Setup, in the NVIDIA splash screen, press

[Del]

or

[F2]

.

3. On the

Advanced

tab, scroll to

Trusted Computing

and press

[Enter]

.

4. To enable TPM, scroll to

Security Device

and switch the setting to

Enabled

.

5. To continue the boot process, save and exit the BIOS Setup .

After the system boots, you can initialize the drive encryption.

5.9.2. Clearing the TPM

If you lost your TPM password, you cannot access the TPM contents. The only way to access

TPM again is to clear the contents. After clearing the TPM, you need to initialize the vault and

SED authentication keys again.
To clear the TPM, complete the following steps:

1. Reboot the DGX Station A100.
2. To enter the BIOS Setup, in the NVIDIA splash screen, press

[Del]

or

[F2]

.

3. On the

Advanced

tab, scroll to

Trusted Computing

and press

[Enter]

.

4. Clear TPM2.
5. Scroll to

Trusted Computing

and press

[Enter]

.

6. Scroll to

Pending Operation

and press

[Enter]

.

7. In the Pending Operation dialog box, select

TPM Clear

, and then press

[Enter]

.

8. Save and exit the BIOS Setup.

«
...
39
40
41
42
43
...
»

Summary of Contents for DGX Station A100









































































Reviews:

No comments