manualshive.com logo in svg

Nvidia DGX Station A100, User Manual, Page: 67 / 72

Share
Download
Nvidia DGX Station A100 User Manual Download Page 67

Compliance

DGX Station A100

DU-10189-001 _v5.0.2   |   61

 
This product complies with following UK regulations:

SI 2016 No. 1091 “The Electromagnetic Compatibility Regulations 2016”

SI 2016 No. 1101 “The Electrical Equipment (Safety) Regulations 2016”

SI 2012 No. 3032 “The Restriction of the Use of Certain Hazardous Substances in Electrical
and Electronic Equipment Regulations 2012”

SI 2010 No. 2617 “The Ecodesign for Energy-Related Products Regulations 2010”

D.15.  United States

Federal Communications Commission (FCC)

FCC Marking (Class A)

This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including any interference that may cause undesired operation of
the device.

NOTE

: This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.

Summary of Contents for DGX Station A100









































































Reviews:

No comments