Nussbaum JUMBO NT 3500, Operating Instruction And Documentation

Page: 29 / 48

Operating Instruction and Documentation
Jumbo NT 3500
- 29
-
Maintenance plan
Period
Check the condition of the type plate, capacity sticker, short operating
instruction. If necessary replace it.
minimum once in a
year
Clean the piston-rod and the stripper by using compressed air and
spray the piston-rod with Oil. Check it on damage. minimum once in a
year
Clean and lubricate the moving parts of the lift (hinge bolts, sliding
pieces, sliding surfaces, sliding blocks) grease with a multipurpose lipid
(example: Auto Top 2000 LTD. Agip). minimum once in a
year
Grease all lubricate nipples with a multipurpose lipid. (example: Auto
Top 2000 LTD. Agip). minimum once in a
year
Durability of the hydraulic hoses:
The use duration of the hose lines should not exceed six years,
including a storage time of at most two years.
minimum every sixth
year
The hydraulic oil has to be changed at least once a year. To change
the oil, lower the lift into the lowest position. Empty the tank and
replaced clean oil, approx. 14 litres are needed. A high quality
hydraulic oil is recommended, it should be 32 cst. (e.g. HLP 32 LTD.
OEST Company)
Use a ATF-Suffix hydraulic-oil (OEST Company ) if the ambient
temperature is under 5 degree centigrade. After the fill up, the hydraulic
oil must be between the upper and low marking of the oil level gauge.
minimum once in a
year
Check the Function and the Condition of the foot protection. If
necessary replace it.
minimum once in a
year
Check the function of the CE-Stop and the loudspeaker.
minimum once in a
year
Check the condition of the hydraulic hose and screw fittings.
minimum once in a
year
Clean the sliding surfaces of the sliding blocks. Lubricate it with a
multipurpose fat.
minimum once in a
year
Check all welded joints for cracks on the automotive-lift.
If any cracks are found on the lift cease use immediately. Switch-off
and secure the main switch (lock) and call the service partner.
minimum once in a
year