Nussbaum JUMBO NT 3500, Operating Instruction And Documentation

Page: 28 / 48

Operating Instruction and Documentation
Jumbo NT 3500
- 28
-
Attention: One platform will be lower approx. 5 cm. The lowering process stoped if
the screw is closed.
• Afterwards open a slowly little the emergency lowering screw N2. Do not unscrew it.
• The emergency lowering starts. You can influence the lowering speed with this
emergency lowering screw.
• Lower the lift in the lowest position.
• Observe the complete process.
• If the lift reached the lowest position, remove the polymer-supports and drive the vehicle
out of the lift.
• After the emergency lowering close the screws N1 and N2 and the locknuts.
• Do not work with the lift until the faulty parts are exchanged. Call the service-partner.
Switch off the main switch and lock it. Do not work with the lift until the faulty parts
are exchanged.
7. Inspection and Maintenance
Before conducting maintenance work, preparations must be made to ensure that
during maintenance and repair work there is no risk to the safety of people working
on or around the lift and also that there is no risk of damage to equipment being used
on or around the lift.
To guarantee the utmost availability and to ensure that the lift remains functional,
maintenance work contracts are organised between our clients and their local retailers.
A service must be performed at regular intervals of 3 months through the operator in
accordance with following service manual. If the lift is in continuous operation or in a dirty
environment, the maintenance rate must be increased.
During daily operation the lift must be closely observed to ensure that it is functioning
correctly. In the case of malfunction or leakage the technical service must be informed.
Nussbaum lifts have been designed and manufactured for longevity and safe operation.
Proper installation and operation, regular inspections and ensuing preventative maintenance
by authorized personnel and product care, are the key to operators safety, product reliability,
low overall repair costs, qualified warranty claims and finally, longevity of the lift. Our lifts are
German TÜV and European CE certified and meet or surpass the safety standards of the
countries in which we sell. European regulations for instance, oblige inspection by qualified
personnel, every 12 months during the life span of the lift.
Whatever the regulations are in a given country, the following are the minimum,
requirements regarding the maintenance of Nussbaum lifts.
7.1 Inspection and Maintenance
Before beginning any maintenance work isolate the power supply. Secure the main
switch. (lock it). Secure the danger area around the automotive lift and secure the lift
against unintentional lowering.