Nussbaum JUMBO NT 3500, Operating Instruction And Documentation

Page: 7 / 48

Operating Instruction and Documentation
Jumbo NT 3500
- 7
-
1.Introduction
The document ”Operating Instructions and Documentation” contains important information
about installation, operation and maintenance of the Jumbo NT.
To furnish proof of installation of the automotive lift the form ”Record of Installation” must be
signed and returned to the manufacturer.
To furnish proof of the singular, felt this documentation contains forms. The forms should be used
to document the checks. They should not be removed from this documentation.
Every Changes to the construction and displacement of the automotive lift must be registered in
the ”Master document” of the lift.
1.1 Installation and check of the automotive lift
Only specialist staff is allowed to do work concerning safety and to do the safety checks of the lift.
They are called experts and competent person in this document.
Experts are persons (for example self-employed engineers, experts) which have received
instruction and have experience to check and to test automotive lifts. They know the
relevant labour and accidents prevention regulations.
Competent person are persons who have acquired adequate knowledge and experience with
automotive lifts. They took part in training from the lift-manufacturer (servicing
technicians of the manufacturer or dealer, are competent)
1.2 Information of Warning
To show danger and to show important information the three symbols below are used. Pay
attention to those passages, which are marked with these symbols
Danger! This sign indicates danger to life. Inexpert handling of the described
operation may be dangerous to life.
Caution! This sign cautions against possible damage to the automotive lift or other
material defects in case of inexpert handling .
Attention! This sign indicates for an important function or other important
notes.