SPLITMUX Quad Screen Video Splitter
3
CONNECTORS AND LEDS
#
LABEL
CONNECTOR/LED
DESCRIPTION
1-4
HDMI Input Selection (Standard Mode)
1
+, -, TAB, ENTER
Pushbuttons
OSD Menu Navigation (OSD Mode)
SCREEN-
FULL,QUAD,PIP,MODE
(Display Modes)
For selecting the display mode for image placement on the user’s
monitor
2
Directional Arrows
Pushbuttons
Used for OSD Menu Navigation
Also used to toggle the OSD Menu ON/OFF and returning the
SPLITMUX to the default display resolution
3 IR
IN
IR Sensor
Input sensor to receive IR signals from remote control
4
Green/Red LED
To indicate when the SPLITMUX is powered ON (Green) or in
Standby (Red)
5
PWR/STBY
Rocker switch
For switching the SPLITMUX between ON (I) and Standby (O)
6 5VDC
3A
2.1x5.5mm Power Jack
For connection of power supply
7 HDMI
IN1-4
HDMI female connector
For connection of HDMI video sources
8 HDMI
OUT
HDMI female connector
For connection of cable to HDMI Monitor
9 RS232
(DCE)
RJ45 female connector
For RS232 serial connection of a terminal to control the system
10 ETHERNET
RJ45 female connector
For connection to an Ethernet for remote multi-user control
•
Yellow LED- indicates 100Base-T activity when illuminated,
10Base-T activity when dark
•
Green LED – illuminated when Ethernet link is present,
strobing indicates activity on the Ethernet port
