SPLITMUX Quad Screen Video Splitter
65
Save and Recall
To save a configuration of channels on the display using the IR Remote control, the <Save> and <Recall> buttons are provided.
Up to 10 configurations can be saved and recalled. Once the display has the configuration you want to be able to quickly return
to, press the <Save> button followed by two digits (01-10). To recall a configuration at any time, press the <Recall> button
followed by the associated two digit number.
Multiple Switch Control
All NTI SPLITMUX-HD-4RT will work with the same IRT-UNV IR Remote control. As a result, a user with multiple NTI
SPLITMUXs may find that, if the switches are installed too close together, both switches may respond to an IR command intended
only for one switch. Or, the user may want to control multiple switches with a single remote, instead of having one remote per
switch. To accommodate this situation, the IRT-UNV IR Remote provides the “SYS” button, which can be used to select the NTI
switch to be controlled.
All switches will have the capability to allow the user to set the switch address (0-15) (see page 16, 40 or 54 ). Each switch to
be separately controlled must be set to a different address prior to using the Remote Control.
With the addresses set;
press the <SYS> button on the IRT-UNV,
followed by a single (i.e. <1>) or two digit number (i.e. <0> + <1>) corresponding to the address of the switch to be
controlled,
followed by <ENTER>.
Upon accepting the SYS command, the switch with the corresponding address will illuminate the “IR” LED in green for visual
indication and respond to all IR Remote commands. All other units will illuminate in red and ignore any further commands.
Note: To prepare to send a command to all at the same time, press “SYS”, “0”, then “ENTER”. All LEDs will
illuminate green to indicate readiness to receive commands.
Technical Specifications For IRT-UNV
Number of Controllable Systems
Max: 15
Pushbutton Control
29 keys
Power supply
2x AAA Battery
Chassis material
Plastic
Approvals RoHS
Troubleshooting the IRT-UNV
PROBLEM
SOLUTION
IRT-UNV is not selecting inputs
or changing modes
•
Check battery
•
The IRT-UNV may be configured to control the wrong switch- see “Multiple
Switch Control” above.
