SPLITMUX Quad Screen Video Splitter
61
Figure 69- PIP Screen Mode settings
Pip Screen Mode Settings
Active Channel
Select which active channel is in full screen mode
Enable full screen
Enable/disable active input in full screen mode with overlay
Enable aspect ratio
Enable/disable the aspect ratio to be maintained for all displayed images
PIP Mode
Select how many PIP images will be displayed, 2, 3 or 4 (one will be at full screen)
PIP 1 Input
Select which input channel will be in PIP upper right position
PIP 2 Input
Select which input channel will be in PIP center position
PIP 3 Input
Select which input channel will be in PIP lower right position
PIP Horizontal Position
Position of PIP images from the right side of the screen- range is 0-90% of screen width
PIP Vertical Position
Position of uppermost PIP from the top of the screen- range is 0-60% of screen height
PIP Size
Size of the PIP image- range is 10-50%
Enable Scan
Enable input channel scanning when PIP Mode is set to “Single”
Scan Time
Set the dwell time while scanning- the amount of time (in seconds) each channel will appear in
the single PIP position- range is 0-999
Active Scan
Enable/disable full screen scanning between the inputs while in PIP mode
Enable Border
Place a border around each input displayed
Border Color
Choose the color of the border around each input
Border Width
Choose the width of the border around each input- from 0-50 pixels
