LinMot Installation Guide
6 Description of the connectors / Interfaces
6.1 X1
X1
Motor Supply / Regeneration Resistor
Screw Terminals
External Regeneration Resistor (RR01-10/60, Art. Nr. 0150-3088)
External Fuse: max. 32AT (for example RK5 Class Fuse Bussmann FRN-R-30)
Supply nominal 72VDC (24...85VDC / 30..85VDC for UL compliance)
(See chapter Power Supply Requirements for compatible power supplies.)
Absolute max. Rating 72VDC +20%.
If motor supply voltage is exceeds 90VDC, the controller will go into error state.
- Tightening torque: 0.5 - 0.6 Nm
- Screw thread: M2.5
- Use 60/75°C copper conductors only
- Conductor cross-section: use only 2.5mm
2
/ AWG 14
- Stripping length: 13-15mm
- Max. length: 4m
6.2 X2
X2
Motor Phases
PH1+
/U
PH1-
/V
PH2+
/W
PH2-
/X
SCRN
LinMot Motor:
3-phase EC-Motor:
Motor Phase 1+
red
Motor Phase U
Motor Phase 1-
pink
Motor Phase V
Motor Phase 2+
blue
Motor Phase W
Motor Phase 2-
grey
Motor Phase X
Shield
Screw Terminals
- Tightening torque: 0.5 - 0.6 Nm
- Screw thread: M2.5
- Use 60/75°C copper conductors only
- Conductor cross-section: 0.5 – 2.5mm
2
(depends on Motor current) / AWG 21 -14
- Stripping length 13-15mm
NTI AG / LinMot
®
www.LinMot.com
Page 8/20
E
1
2
0
0
In
s
ta
lla
ti
o
n
G
u
id
e
