NR Electric RCS-9698G, Instruction Manual

Page: 44 / 81

Chapter 4 HMI Operation Introduction
NR ELECTRIC CO., LTD. 34
counterpart operating information indirectly. Four menu items are under STATE SHOW and they
are detailed described in the following sections.
1) LOC.STATE
The STATE SHOW menu is shown in the following figure.
TYPE LOC.
STATE DISPLAY
NORMAL RUN
Title
Operating
Status
Label
STATE
Item
STATE
Figure 4.5-2 LOC. Display
Items Signification:

Title: it is the menu items name State Display .

Item: Item shows the content currently displayed. It might be: LOC., COM , NET and DEV.
Item can be interchanged by pressing keys.

Operating Status: it shows the native equipment’ s current operating information. It might be:
INACTIVE RUN: It indicates that the native equipment is working as HOT STANDBY
MACHINE without any internal fault been detected. It also indirectly points out that its
counterpart is working as HOST MACHINE . Simultaneously, the LED labeled STANDBY is lit
on and a normal open contact of terminal 14-15 on PWR Board is being closed to indicate that
the native equipment is been in HOT STANDBY MACHINE mode.
NORMAL RUN: It indicates that the native equipment is working as HOST MACHINE without
any internal fault been detected. It also indirectly points out that its counterpart is working as
HOT STANDBY MACHINE or the counterpart has been in the CLOSE DOWN mode or
actually there isn’ t any counterpart for the native equipment at all.
FAULT RUN: It shows although that at least one hardware or software exception has bee
detected by the device self-diagnostic facilities, the device still works as a HOST MACHINE .
The device needs to be handled to clear the exception.
2) NET STATE
Communication status of each Ethernet port on every CPU board is displayed in this menu item as
presented in the following figure. By pressing any of keys, it is very easy to select
CPU Number, Ethernet Port Number or NET .