NR Electric RCS-9698G, Instruction Manual

Page: 59 / 81

Chapter 4 HMI Operation Introduction
NR ELECTRIC CO., LTD. 49
“ NOT USED ”since there is nonexistence of data synchronization.
4.5.3.4 RUN SCHEME
This menu item is used to set the operating mode of RCS-9698G/H . RUN SCHEME Menu is
shown in the following figure.
Figure 4.5-25 Dual System Operation Mode Setting
In the above figure, “ Scheme Selection ”is fixed as “ 1 ”, “ Scheme Description ”is fixed as “ RTU ”.
4.5.3.5 ADDRESS
When several equipments are applied in different substations, combination of FACTORY
(FACTORY ADDRESS) and LOCAL (LOCAL ADDRESS) can uniquely determine a equipment.
Default value of FACTORY ADDRESS/LOCAL ADDRESS is 0.
The range of FACTORY ADDRESS/LOCAL ADDRESS is an integer between 0 and 65535.
Figure 4.5-26 ADDRESS
Press keys to set FACTORY ADDRESS/LOCAL ADDRESS .
4.5.3.6 XOR COMMU STA
XOR COMMUN STA is used to set how to send the signal indicating the communication between
RCS-9698G/H and an IED is OK or not.
The following 2 figures show the XOR COMMUN STA menu.