Noxxa BM325SC, Instruction Manual

Page: 49 / 80

49
CLEANING INSTRUCTIONS
The following illustrations are for information purposes only.
CLEANING (Always unplug unit)
ANY SERVICING REQUIRING DISASSEMBLY, OTHER THAN THE CLEANING DESCRIBED
BELOW, MUST BE PERFORMED BY AN AUTHORIZED SERVICE REPRESENTATIVE.
UNAUTHORIZED SERVICE WILL VOID YOUR WARRANTY.
To assure optimum safety, keep unit clean, free of grease and food buildup.
STORING
• Be sure the Breadmaker oven is completely cooled before storing.
• All removable parts should be thoroughly cleaned and dried.
• Store with door closed.
•
Avoid using any cleaning agents
other than dish detergent.
•
Do not use steel wool or other
abrasive materials.
•
Do not wash any parts in the dish
washer.
•
Clean bake/broil pan, wire rack
and cover with a mild non-abrasive
cleaner and a plastic scouring pad.
Rinse and dry thoroughly.
•
Wipe the shaft of the bread
pan with a soft cloth or sponge
to prevent damage to the seal
packing. Allow to dry before storing
the pan inside the machine.
•
It is not necessary to remove the
kneading blade for cleaning. But
if you wish to, it must be removed
after each use otherwise it will
become very difficult to remove.
•
To remove, fill the pan with hot
soapy water and allow it to soak for
up to 30 minutes. Wash it with a
nylon bristle brush or cloth and dry
thoroughly.
•
DO NOT IMMERSE the bread
pan in water. Fill the pan with hot
soapy water and allow
it to soak for up to
30 minutes. Wash it
with a nylon bristle
brush or cloth and dry
thoroughly.
•
Do not place bread pan
in conventional oven.
•
Do not use metal utensils inside the
bread pan. They will damage the
non-stick coating.
NOTE:
The non-stick coating may
change color over time. This is caused by
moisture and steam and in no way affects
performance.
•
Wipe the exterior with a damp
dishcloth after each use.
•
Do not immerse the appliance in or
splash with water.
•
After using, cool and wipe out the
oven interior with a damp dishcloth
or plastic scouring pad. Do not
rub too hard as the surface can be
scratched.
•
Clean door glass with glass cleaner
or mild detergent using a damp
cloth or plastic scouring pad.
•
Rinse and dry thoroughly before
closing door.
SEAL PACKING
SHAFT
KNEADING BLADE