NVC-DN6227SD-II and NVC-DN6237SD-
II User’s manual, ver. 1.0
All rights reserved © AAT Holding sp. z o.o.
23
5. CAMERA OSD MENU
Before programming or operating the PTZ camera, you have to select a desired camera number (via
keyboard or another remote controller).
Accessing the camera’s menu depends on the controller type and the protocol used.
All the details regarding camera communication parameters are described in the instruction manuals of
the NV-KBD50/70 keyboards (or other controllers).
ATTENTION!
The procedure of camera programming refers to keys of the NV-KBD70 keyboard and N-Control
telemetry protocol.
When using a different controller or protocol select control buttons appropriate for given function.
Menu is accessible after pressing the
MENU
button,
ESC
closes the menu. When additional functions
(such as tour or auto-scan) are programmed or when camera is in alarm mode, menu is accessible only
after abandoning current mode (e.g. by forcing the tilt or pan movement or by confirming alarm).
Main menu is depicted below:
SPEED DOME CAMERA
SYSTEM INFORMATION
DISPLAY SETUP
CLOCK
DOME CAMERA SETUP
PASSWORD SETUP
SYSTEM INITIALIZE
EXIT
CAMERA OSD MENU
