NVC-DN6227SD-II and NVC-DN6237SD-
II User’s manual, ver. 1.0
All rights reserved © AAT Holding sp. z o.o.
11
2. START-UP AND INITIAL NVC-DN62x7SD-II CONFIGURATION
2.1. Description of crucial electrical connectors
NVC-DN62x7SD-II Camera
2.2. Connecting MAIN cable
Power supply should be connected to MAIN cable, as depicted below :
Cable allows to create basic electrical connections for power supply and remote controlling of the
camera.
ATTENTION!
The camera is 12 VDC/24VAC supplied. Minimal required power output for the power supply
unit should be at least 38W. In case of using 12 VDC power supply please pay attention to wire
polarisation!
As while it is not important when using AC power supply, it is recommended to connect the same
phase to respective power supply terminals in devices.
START-UP AND INITIAL CAMERA CONFIGURATION
1. I/O - Alarm input/output terminal block
2. MAIN - Main connector ( 12 VDC/24VAC power supply, RS485, BNC monitor output)
POWER + (+12VDC/24VAC, orange wire)
POWER - (-12VDC/24VAC, white wire)
