NVC-DN6227SD-II and NVC-DN6237SD-
II User’s manual, ver. 1.0
All rights reserved © AAT Holding sp. z o.o.
31
5.4.5. PATTERN SETUP -
Pattern is a sequence of an existing functions (pan, turn, zoom, etc.), that
may be called via keyboard or used in tours. Maximum number of steps for a single pattern is 1200.
PATTERN SETUP
PATTERN NO
: 1
CLR PATTERN
: CANCEL
RUN PATTERN
<EDIT PATTERN>
BACK
EXIT
PATTERN NO -
selects pattern for configuration
CLR PATTERN
- clears a selected pattern
RUN PATTERN
- starts a pattern
<EDIT PATTERN>
- starts pattern programming. Opening the function displays the following
sub-menu:
EDIT PATTERN 1
MOVE TO START POSITION
NEAR:START / FAR:CANCEL
To program a pattern please follow the instructions below:
Select pattern’s starting point.
Pressing
IRIS CLOSE or
FOCUS NEAR starts programming.
Move camera via joystick along a desired path - camera stores automatically all
movements (PTZ) made during programming
Subsequent
IRIS CLOSE or
FOCUS NEAR pressing saves pattern and returns to a higher
level menu.
Pressing
IRIS CLOSE or
FOCUS FAR discards changes and exits pattern programming.
CAMERA OSD MENU
