NVC-DN6227SD-II and NVC-DN6237SD-
II User’s manual, ver. 1.0
All rights reserved © AAT Holding sp. z o.o.
32
5.4.6. TOUR SETUP -
Allows to set up Tours, i.e. lists of consecutively executed surveillance
functions (presets, patterns, and scans, up to 20 functions per tour). During tour, camera stops at presets
for a defined period of time, while scans/patterns are repeated certain amount of times.
TOUR SETUP
TOUR NO.
: 1
CLEAR TOUR
: CANCEL
RUN TOUR
<EDIT TOUR>
BACK
EXIT
TOUR NO. -
selects tour for configuration
CLEAR TOUR
- clears a pre-programmed tour
RUN TOUR
- selecting starts test run of a tour
EDIT TOUR
- starts patrol programming. Selecting it displays the following window:
EDIT GROUP 1
NO ACTION_ ##
DWELL
OPT
1 PRESET
1
00:09
10
2 PRESET
4
00:14
30
3 PRESET
6
00:03
10
4 SCAN.
1
00:10
2
5 PATTERN
1
00:15
1
BACK
CANCEL
Pressing IRIS CLOSE and FOCUS NEAR starts programming.
Using joystick, select desired action for the first position (marked with frame), its number,
dwell time after action and speed of switching (for presets) or number of repeats
(for patterns and auto-scans)
Next, please go to sub-sequent positions and configure them as described above.
Pressing IRIS OPEN or FOCUS FAR returns to previous menu.
In order to save changes please select BACK and confirm with IRIS CLOSE or FOCUS
NEAR
CAMERA OSD MENU
