NVC-DN6227SD-II and NVC-DN6237SD-
II User’s manual, ver. 1.0
All rights reserved © AAT Holding sp. z o.o.
34
5.5. PASSWORD SETUP
–
allows to turn on password protection for the camera MENU.
PASSWORD SETUP
CHECK PASSWORD
OFF
<EDIT PASSWORD>
BACK
EXIT
CHECK PASSWORD -
allows to check password before entering the menu
<CHANGE PASSWORD> -
this menu opens the edit window where you can enter a new
password .
5.6 SYSTEM INITIALIZE
–
allows to restore factory defaults or re-initialize the camera.
SYSTEM INITIALIZE
CLEAR ALL DATA
NO
CLR DISPLAY SET
NO
CLR CAMERA SET
NO
CLR MOTION SET
NO
CLR EDIT DATA
NO
REBOOT CAMERA
NO
REBOOT SYSTEM
NO
BACK
EXIT
CLEAR ALL DATA -
running this function restores all values to factory defaults.
CLR DISPLAY SET -
running this function restores display settings to factory defaults.
CLR CAMERA SET -
running this function restores camera module settings to factory
defaults.
CLR MOTION SET -
this function restores PTZ settings to factory defaults.
CLR EDIT DATA -
clears all presets, patterns, tours and autoscans
REBOOT CAMERA -
function allows to perform a hardware reset of the integrated circuit
responsible for image processing.
REBOOT SYSTEM -
allows to perform a hardware camera reset and its subsequent
initialization and calibration (identical to power loss scheme).
CAMERA OSD MENU
