NVC-DN6227SD-II and NVC-DN6237SD-
II User’s manual, ver. 1.0
All rights reserved © AAT Holding sp. z o.o.
18
4. CONTROLLING THE CAMERA
N-Control is the recommended control protocol for the Novus NVC-DN62x7SD-II series cameras and
allows to fully exploit their abilities. Cameras may be also PELCO-D/PELCO-P controlled, however
methods of programming and control differ.
To establish proper connection between camera and keyboard following conditions must be met:
an unique camera address for the whole system
the same baud rate (speed setting) in the camera and in the keyboard (2400/4800/9600)
Details regarding camera control settings are described in proper manual of the keyboard.
4.1. Controlling the camera via the N-Control
In order to start camera control please enter its number via numpad and confirm with (for NV-
KBD50 keyboard) or
(for NV-KBD70) key.
When controlling the camera via NV-KBD70 keyboard, function and numerical keys as well
as joystick are used.
Controlling camera via the NV-KBD50 utilizes function, numpad buttons as well as joystick.
To open camera menu please press and hold for 3 sec. button (for NV-KBD50) or press button
(for NV-KBD70).
Navigation through camera’s OSD menu:
CONTROLLING THE CAMERA
Action
Function
Joystick up or down
Navigation through menu
Changing parameter values
Editing field value
Joystick left or right
Navigation through text fields
Navigation through settings fields
IRIS CLOSE
FOCUS NEAR
Execution of a command
Value edition
IRIS OPEN
FOCUS FAR
Cancelling a command
Return to a higher-level menu
CAM
