~
10
~
ЕТ-485
NOVATEK-ELECTRO
Parameter
Description
Address
Bit 2
0: the connected client cannot get the permit for
requesting
functions
of
recording
the
devices,
connected to ET-485
1: the connected client can get the permit for requesting
functions of recording the devices, connected to ET-485
Bit 3
0: the connected client does not have the permit for
requesting
functions
of
recording
the
devices,
connected to ET-485
1: the connected client has the permit for requesting
functions of recording the devices, connected to ET-485
Bit 4
0: the connected client cannot get the permit for access
to ET-485 registers, except for registers of version,
password, mode and access flags
1: the connected client cannot get the permit for access
to ET-485 registers, besides registers of version,
password, mode and access flags
Bit 5
0: the connected client does not have the permit for
access to ET-485 registers, except for registers of
version, password, mode and access flags
1: the connected client has the permit for access to ET-
485 registers, except for registers of version, password,
mode and access flags
Bit 6
0: the connected client does not have the permit for
requesting function of recording ET-485
1: the connected client has the permit for requesting
function of recording ET-485
Bit 7
0: the connected client does not have the permit for
setting ET-485
1: the connected client has the permit for setting ET-485
(similar to register 121)
Bit 8
0: the client is not the main client
1: the client is the main client
Bit 9
1: the client has the right for connection
(always read as “1” after connection)
Bit 10 0: the client is connected not by ACC
1: the client is connected by ACC
Maximum of Modbus TCP clients Maximum observed number of Modbus TCP clients (from the
moment of start-up)
142
Maximum of queries, queries/sec Maximum observed load of Modbus (from the moment of start-
up)
143
Frequency of answered queries,
queries/sec
Number of processed queries per second, to which the answer
is formed without any errors
144
Time before connection to Modbus
TCP remote server
0: connection to remote server established
1: connection to remote server is being established
2
– 65534: number of seconds to repeated connection
65535: redirection to remote server is off
145
Time before active connection to
the client (or DCRS)
0: ACC is established
1: ACC is being established
2
– 65534: number of seconds to repeated ACC
65535: ACC is off
146
Table 8
– Unit configuration settings
Parameter
Min
–
Max
Factory
setting
Description
Address
Addressing in the Ethernet network
Static IP-
address
IP-
address
192.168.0.111
IP-address of the unit in Ethernet network shall be equal to
this value if dynamic addressing is disabled or not
available.
500
–
503
Subnet mask
IP-mask 255.255.255.0 Used only with static IP address
504
–507
Gateway
IP-
address
192.168.0.1 Used only with static IP address or as an IP filter for
DHCP server
508
–
511
