MCTRL4K User‘s Manual
-12-
any operation, then it will go back to the homepage automatically.
Hardware Version
Check the hardware version of this controller. Connect LCT-Mars through PC to
upgrade the firmware program if new versions are released.
Communication Settings
Set communication mode and network parameters of MCTRL 4K.
Communication Settings
Mode Select
USB Pr
eferred
Network Settings
Network Settings
Config IPv4
Manually
IP Address
Subnet Mask
Reset
Communication modes include USB preferred and LAN(Local Area Network)
preferred. When both USB control interface and Ethernet control interface are
connected to PC, the controller defaults to USB preferred and will control the LED
display via USB interface. Otherwise, the sysytem will control LED display via LAN.
Network Settings include manual and automatic. Please note that IP address
cannot conflict with the address of other devices during manual setting.
Language
Change interface language of the unit.
XI'AN
NOVASTAR
TECH
CO.,LTD.
